Най после добро OC дъно за А64

<blockquote id="quote"><font size="1" id="quote"><b id="quote">quote:</b id="quote"></font id="quote"><table border="0" id="quote"><tr id="quote"><td class="quote" id="quote"><font size="1" id="quote">This late 3200+ achieved a new overclocking record on the K8N Neo Platinum at 246FSB, at the stock 10X multiplier and default voltage. This 23% overclock at stock multiplier is more like those that we are accustomed to seeing on Pentium 4. Dropping the multiplier, the highest FSB overclock that we could achieve was the BIOS limit of 300. We fully expect that the K8N can go much higher on FSB, but Clock Gen for the nForce3-150 from www.cpuid.com only partially works on the 250 chipset. The FSB portion of Clock Gen does not function correctly yet on the updated 250, so the BIOS limit is the current FSB limit.</td id="quote"></tr id="quote"></table id="quote"></blockquote id="quote"><font size="2" id="quote"></font id="quote">







<blockquote id="quote"><font size="1" id="quote"><b id="quote">quote:</b id="quote"></font id="quote"><table border="0" id="quote"><tr id="quote"><td class="quote" id="quote"><font size="1" id="quote">We were also able to run OCZ DDR4400EL at a 1:1 ratio at a FSB of 270x9, or DDR540, which is near the limit of this CPU on this board</td id="quote"></tr id="quote"></table id="quote"></blockquote id="quote"><font size="2" id="quote"></font id="quote">







<blockquote id="quote"><font size="1" id="quote"><b id="quote">quote:</b id="quote"></font id="quote"><table border="0" id="quote"><tr id="quote"><td class="quote" id="quote"><font size="1" id="quote">HyperTransport could be maintained at the 4X (800) setting up to a 260 to 265 FSB. Above this point to the BIOS maximum of 300FSB, we needed a 3X HT setting</td id="quote"></tr id="quote"></table id="quote"></blockquote id="quote"><font size="2" id="quote"></font id="quote">







<blockquote id="quote"><font size="1" id="quote"><b id="quote">quote:</b id="quote"></font id="quote"><table border="0" id="quote"><tr id="quote"><td class="quote" id="quote"><font size="1" id="quote">As much as the option to 300FSB improved the board, we now see 350 or even more would be even better</td id="quote"></tr id="quote"></table id="quote"></blockquote id="quote"><font size="2" id="quote"></font id="quote">





Цялото ревю:

http://www.anandtech.com/mb/showdoc.html?i=2036&p=1

Ще видим като излязат и дъната на EPoX и ABIT ...В ревюто споменаха , че ще поддържат до 3.2V напрежение към паметта ...Дано пак настанат добри времена за нас [8D][:D]

ше настанат сигурен съм Момчи.... :) особенно , ако пак пазаруваш от е-bay :) ше се набутваш с шипинг :)

Хе хе, the inquirer са изкарали само 2500 МБ/с sandra mem с epox NF250 GB...чудя се тия хора изобщо знаят ли какво правят. Или биоса е шитав...



И BTW нещо много странно, 250 с тайминги 2-2-2-10 върви по добре отколкото с 2-2-2-5, за това все още не мога да намеря смислено обяснение така че го приемам за даденост [xx(]