How do you get into the service menu on the vt60s?
1)Press and hold the "VOL -" button ON THE PLASMA TV.
Do not release the "VOL-" button just yet.
2)While holding the "VOL-" button on the TV set itself, now press the "INFO" button on the remote control 3 times
"Start Adjustment Menu" message will be displayed followed by the Service Menu after few seconds.
You should see this as your display:
ADJUST {Picture Adjustment}
WB-ADJUST {White Balance Adjustment}
OPTION {Option Setting}
V-SUS {V-SUS Adjustment}
AGING
SRV-TOOL {Service Tool}
"1" & "2" buttons move through options
This is your first button press while in the above display:
3) Press the "2" button once to select "SRV-TOOL".
Your display will look like this:
SRV-TOOL VIVID
00 (note that this 00 is high lighted in orange. Just leave it there. Do not scroll away from this)
1,2:MAIN SELECT
9 :Picture MANU SELECT
OK:ENTER
4) Then press the "OK" button to access it. Note: Do not scroll. you should not highlight the OK selection on your screen. You are simply hitting the "OK" button on your remote.
5) Using the cursor keys, highlight the right side of the last item "PTCT :00.00.00.00.00" Note the "right side" of the last item is a blank box for time being.
Your movements with the remote control cursor on your remote should be five presses down and one press to the right in order to accomplish step #5
6) Then press and hold the {MUTE} button for 3 seconds.
__TIME = Hours : Minutes of operation.
COUNT = Times the Plasma was powered on.
7) To exit, unplug the power cable. Or hold down the exit
Button on the remote (results in the TV turning off/on automatically
Новини
Форум
Актуално
сървър
148Одобрявам
Отговор с цитат
Първоначално публикувано от Cakicha 
